# 3CX

[Web version](https://docs.eis.it/en/voip/3cx)

This procedure concerns a SIP Trunk EIS in mode **Registration**. Before starting recovers from Hive username, password and numbering associated with the trunk.

### Add the trunk

In the 3CX panel open **SIP Trunk** and select **Add SIP Trunk**.

### Set the registrar

Use `sip.teameis.it` as a trunk recorder.

### Configure Authentication

Select the account-based mode and enter username and password displayed in Hive.

### Check out calls

Configure outbound parameters and composition rules based on the numerical format provided by your call plan.

### Add the DID

Enter in the DID section all numbers associated with the trunk and connect them to the desired internal destinations.

## Testing

- verify that the trunk status is registered;
- calls each DID from an external line;
- run an outgoing call and check the number presented;
- verify the audio in both directions;
- check that firewalls and NAT do not misuse signals and media.

> The interface entries can change between 3CX versions. See also the [original 3CX guide on EIS Wiki](https://wiki.eis.it/VoIP/Eis-Trunksip/Apparati-Certificati/3CX).
